* Read*

Corbin offers two versions of our Classic solo seat and two different pillion pad options for your passenger. The uniquely styled Classic Solo looks excellent while providing an extraordinary amount of rider comfort. Corbin's seating platform conforms to the shape of your body with separated seating and back platforms that provide support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design.

Got reach issues on your Bagger? We also make a "Close" version of the Classic solo that provides seating almost two inches closer to the bars for an easier reach. We made the nose a little narrower to allow for easier ground reach too. To figure out which design is best for you, just follow these simple steps: Sit on the motorcycle in your regular riding posture and have a friend measure from the threaded hole in your fender to the area where you are seated. Now compare this measurement: 14 inches use our Classic Solo, 15.75 inches use our Close Solo.

For added back support both Classic solo and Close solo accept an optional rider's backrest that provides an additional nine inches of vertical support. Our backrest installs easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of riders, it is fully angle adjustable. Just install the backrest into the saddle, lock it in place with a single set screw and adjust the backrest angle to suit.

Corbin's Ovalbac series backrests come covered to match your saddle, but also offer the option of custom finishing plates on the rear. Backrests come standard with an ABS leather look backing plate but you can choose from a variety of models.

For maximum versatility we've designed the Corbin solo saddles to work with two different style passenger pillion seats. For a very sly, low-profile look the Hollywood pillion is the choice. This model is great for occasional passengers that ride with you on short to medium length trips.

If your passenger wants touring class comfort, than our Touring Pillion is the choice for you. This model offers a wider seating area for more square inches of body contact. Just like the seat, our pillions are built with our exclusive high-density Comfort Cell foam to provide firm support that lasts. Comes decorated to coordinate with your Corbin solo saddle.

For an added bit of luxury, both the Classic Solo saddle and Close Solo have the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly rides. This system easily wires directly to your Harley's fusebox and provides two levels of heat with the flip of a switch. Heater unit and automated controller are built into the saddle and come pre-installed. The two position switch is conveniently located on the left side of the seat.

Designed to work with a variety of Harley-Davidson accessory items like detachable sissy bars and Tour Paks. It's not possible to test all possible accessories, but we have confirmed the following most popular items:

• Tall Detachable Sissy Bar #529337A (with HD or Corbin pad)
• Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad)
• Two up Tour Pak Rack #53303-07
• Solo Tour Pak Rack #53260-02
• Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06
• Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07 or #53260-02

Speaking of the Streamliner trunk... This makes a nice, clean addition to your bike while keeping a smooth flowing look. Designed to hold an adult size full face helmet with room to spare. Very convenient for all your traveling needs. Includes sculpted passenger backrest pad in coordinating leather. Get complete information on the Trunk (HERE).

Saddles and pillions include genuine leather seating. This new pattern with black faux-ostrich stripe, braided welts and tuck & roll stitch keeps a subtle look but provides a nice custom touch too. If you prefer to keep things simple, we can make your saddle with smooth black stripe and plain welts. With our new separated seating platform, we recommend always using this stitch pattern.

Pillion seats do not work with the Harley-Davidson tourpak with audio components mounted under the Tour Pak rack as found on the Ultra models. See this image for a view of the component.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
	KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
	ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
	Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Measurements:	Rider Seating Standard: 13" wide x 16.5" long Rider Seating CLOSE:13" wide x 15" long Back Support w/ #02-S: 11" Approx seat height: 26.5" 50's Pillion: 7.5" wide x 10" long Touring Pillion: 12" wide x 11" long
	Installation Instructions: HD-FLHX-8-S
	Installs easily using brackets supplied with the saddle. Corbin's mounting system allows for use of our unique key lock system. Once the brackets are installed, the saddle will install and remove with a twist of the key.
	Pillion seats do not work with the Harley-Davidson tourpak with audio components mounted under the Tour Pak rack as found on the Ultra models. See this image for a view of the component.
	Designed to work with a variety of Harley-Davidson accessory items like detachable sissy bars and Tour Paks. It's not possible to test all possible accessories, but we have confirmed the following most popular items: Tall Detachable Sissy Bar #529337A (with HD or Corbin pad) Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad) Two up Tour Pak Rack #53303-07 Solo Tour Pak Rack #53260-02 Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06 Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07 or #53260-02
	Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

* Click the Product Image to Learn More *

Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $20
Trunkrests for Tour-Pak	We offer multiple trunkrest options for the variety of Tour-Pak models available from HD including the King Tour-Pak, Chopped Tour-Pak and Razor-Pak. Complete the look while providing your passenger with greater comfort! *More Info*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	California Factory: Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Florida Showroom: Corbin Saddles 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 E-Mail General Mailbox

	ITEM	STYLE	DESCRIPTION	PRICE
	#HD-FLHX-8-S-E	Select Stripe Style black faux-ostrich smooth black	Classic Solo, Heated, 2008	$862
	#HD-FLHX-8-S	Select Stripe Style black faux-ostrich smooth black	Classic Solo, no heat, 2008	$618
	#HD-FLHX-8-CS-E	Select Stripe Style black faux-ostrich smooth black	Close Classic Solo, Heated, 2008	$862
	#HD-FLHX-8-CS	Select Stripe Style black faux-ostrich smooth black	Close Classic Solo, no heat, 2008	$618
	#HD-FLHX-6-50S	Select Stripe Style black faux-ostrich smooth black	Hollywood Pillion	$422
	#HD-FLHX-6-TP	Select Stripe Style black faux-ostrich smooth black	Touring Pillion	$422
	#02-SB	Ovalbac Standard Backrest (each)	$328
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

       

FITMENT NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do!

CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.