A little careful design work by the Corbin Wizard's and our new Fleetliner Saddlebags provide a more balanced visual while adding some much needed storage. How much storage? A whopping 100 liters with both bags combined. For those not yet commited to the metric system, that equates to over three and a half cubic feet!

If you haven't flipped through the photos at the top of the page yet, that's an adult full face helmet shown in the right side saddlebag! Yeah, that's a lot of storage room. The left side is slightly smaller to make room for the Rocket swing arm but still may hold some helmets (but not the XXL Aria that we tried).

Our saddlebags are designed to fit specific bike models so they're visually integrated and look awesome! Notice how the Corbin bags mimic the shape of the fuel tank and follow the graceful line of the tail. This helps the bags actually enhance the look of the bike rather than just being an add-on. We also design our saddlebags to fit close to the profile of the Rocket for improved weight handling and aerodynamic efficiency. As you can see, the integrated shape provides a look far cleaner than "one shape fits all" style hard luggage.

Available color matched to all factory colors.

We mold the bags close around the fender rails and in tight to the fender. This allows the bags to carry weight in close where it won't upset your balance. When loaded properly, you won't even know they're back there while you're riding and the bike remains stable at all speeds. This design also keeps a narrower profile for less width to worry about when lane splitting. Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile low like the stock pipe.

Corbin's Rocket III saddlebags will work with accessories mounted on top of the fender like the sissy bar shown. Our bag set will also work with either of the Corbin seat models or with your factory seat.

The Fleetliner saddlebag set INCLUDES Corbin's undertail kit which helps keep a tidy look at the rear. This component moves your license plate up under the tail light and gives a little more length to the tail section. Both the rear fender and saddlebags come hand prepainted to coordinate with your factory paint scheme. Saddlebags are available in a single color or with coordinating four color GT graphics. All saddlebags also include a durable chip resistant black epoxy paint on the wheel facing surface.

Both bags come completely lined to protect your cargo and feature locking doors for security. Molded to fit perfect with your stock turn signals relocated to our undertail. Sure seal weather stripping and adjustable lock keeps them watertight. Doors feature a soft open strut so the doors won't slam down when unlatched. Saddlebag doors are two-layer theroformed rigidity and finished on both sides to look nicer open or closed.

Installation is fairly simple with all required mounting brackets included and no drilling or chassis modifications required!

Polyurethane & ABS Construction	Saddlebag bodies are manufactured of a specially designed polyurethane material for durability and a clean finish. Provides for very tight tolerances with minimal shrinkage so each part comes out true to the original design. Saddlebag doors are constructed of thermoformed ABS.
Finish	Corbin bags are hand finished and painted to coordinate with your factory colors. Available in a single color or coordinated with multiple color paint jobs.
Saddlebag Interior	Corbin Bags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.
Measurements	Capacity: 45 liters left side / 54 liters right side Overall width: 39 inches Door opening: 10" x 16"

Measurements:	Capacity: 45.5 liters left side / 54.5 liters right side Overall width: 39 inches Door opening: 10" x 16"
Installation:	VIDEO #T-R3-20-TAIL | #T-R3-20-BAG
	Installation is simple using hardware and brackets that are included. Stock turn signals are used and relocated to our undertail kit. Minor wiring is required. Suitable for an average weekend mechanic, complete instructions included.
	Fleetliner saddlebags install using a proprietary bracket that mounts to your Rocket in existing locations under the tail section. Includes Corbin undertail / fender kit.
	Corbin saddlebags come complete with lining and weather stripping preinstalled and doors/locks pre-mounted. Basically, take 'em out of the box and install on your bike!
	When loading items inside thebags, it is best to load heavy items closest to the bike for best load bearing and balance. It is important to load items like disk locks carefully. If you throw an item like this into one of the bags, it can create pressure cracks in the paint on the outside of the bag.
	Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

* Click the Product Image to Learn More *

Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $20
Corbin Saddles	We make multiple seat models for the Rocket III also. Designed to work on both the Roadster and the GT models. Check out the Rocket III index page HERE*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	California Factory: Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Florida Showroom: Corbin Saddles 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 E-Mail General Mailbox

	ITEM	DESCRIPTION	PRICE
	#T-R3-20-BAG	Saddlebag / Fender Kit, Rocket III - Single Color	$2428
	#T-R3-20-BAG-B	Saddlebag / Fender Kit, Rocket III - Multi-Color Graphics	$2973
	We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
	Model Year
	Paint Color
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.

       

FITMENT NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do!

CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.